Product parameters
1.LED emitter: Cree XP-L LED, with lifespan of 100,000 hours
2.CCT Range: 6000K-6500K
3.Voltage: 2.0-3.3 Volts
4.Battery used: 1*CR123A Lithium manganese battery or Rechargeable CR123/16340 Li-ion lithium battery
5.Size: 29.4mm(head) *55mm(length)
1.15 in(head) *2.16in(length)
6.Weight: 0.12lb, excluding battery /50gram, excluding battery
7.Light Cup: optics
8.Toughened glass lens with AR coating
9.Premium type Ⅲ hard-anodized anti-abrasive finish and better heat exchange
10.Reverse polarity protection, to protect from improper battery installation
11. Output: high/strobe 500LM

General Operation
It feature ambidextrous side switches that provide momentary or constant activation and allows selection of the light/strobe
1.A tap on either switch turns on or off
2.press and hold either switch for momentary activation of the unit.
3.press both side switches at the same time, will activate strobe mode.

Strobe enable/disable (Strobe mode be activated by tap on either switch)
WKC06 ship from the factory with the strobe mode disabled. To enable strobe, starting from the “off” position by only either switch, tap either switch very rapidly 9 times(within 0.2second per tap)and hold down on the 10^th time. Hold the switch until the light turns off(about one second)which indicates reprogramming was successful. Repeat the procedure above to disable strobe mode.

Strobe operation
Strobe mode can be activated by either switch. within 0.2 second, press either switch, release and immediately re-press for strobe(also could means fast double click)