Description
The Olight Osight C is a compact open-emitter red dot sight built on the industry-standard Ruggedized Miniature Reflex (RMR / 407C / 507C) footprint. It is designed for full-size and compact pistols used for tactical, self-defense, concealed carry and sport shooting.
The reticle is switchable between:
- 3 MOA Dot
- 3 MOA Dot + 32 MOA Circle
- 32 MOA Circle only
This gives you a fine aiming point for precision or a larger circle for fast target acquisition.
A side-loading CR1632 battery lets you replace the cell without removing the optic from the slide, so your zero stays intact. Runtime is up to 75,000 hours on the lowest setting. A motion sensor turns the optic off after 3 minutes of inactivity and wakes it when movement is detected. When battery voltage drops below 2.2V, the reticle triple-flashes once per minute as a low-power warning. Memory function remembers your last brightness setting.
The 24 × 19 mm window uses a multi-coated anti-reflective lens for a bright, clear sight picture. The housing is machined from 7075 aluminum with a hard-anodized finish and is rated IPX7 waterproof. Side buttons control power and brightness and are usable with gloves.
Key Specifications:
- Reticle: 3 MOA Dot & 32 MOA Circle
- Brightness: 10 settings (including 2 Night Vision)
- Window Size: 24 × 19 mm
- Battery: CR1632 (side-loading)
- Battery Life: up to 75,000 hours (low)
- Footprint: RMR / 407C / 507C
- Material: 7075 Aluminum
- Waterproof: IPX7
- Dimensions: approx. 40 × 25 × 25 mm
- Weight: approx. 27 g (with battery)
- Warranty: 5 years
Compatible Firearms (RMR / 407C / 507C footprint)
The Osight C mounts to pistols cut for the RMR footprint, or to optics-ready slides using an RMR adapter plate. Always confirm plate, screw length and torque (typically 15–17 in-lbs with medium/blue threadlocker).
Glock (MOS plate required on factory MOS slides)
- G17, G19, G19X, G22, G23, G26, G34, G45, G47 Gen5 MOS
- G20, G21 Gen5 MOS
- G40 / G41 MOS and other MOS models with an RMR (MOS 02) plate
- Aftermarket RMR-cut Glock slides (direct mount)
Sig Sauer
- P320 Legion, P320 XFIVE Legion, P320 RX / Pro / AXG
- Other P320 slides specifically marked as RMR-compatible (some P320 cuts are DPP and need an adapter)
Canik (usually factory RMR plate)
- TP9 SFx
- SFx Rival / Rival-S
- TP9 Elite Combat / TTI Combat
- Other full-size/compact Canik models supplied with an RMR plate
CZ
- P-10 C / F / S Optics Ready (RMR plate typically required)
- Shadow 2 Optics Ready (RMR plate typically required)
Smith & Wesson
- M&P 2.0 / M&P M2.0 Optics Ready / CORE (RMR plate as required)
Springfield Armory
- Echelon
- XD Mod.3
- 1911 DS Prodigy
Walther (factory RMR plate)
- PDP 2.0 Full Size, Compact, F-Series, Pro, Match and Steel Frame
Heckler & Koch (factory RMR plate)
- VP9 Optics Ready, VP9L OR, VP9 Match and VP9A1 variants
Beretta
- 90 Series RDO / 92X RDO / M9A4 RDO
- APX A1 Full Size / Tactical RDO (plate as required)
Shadow Systems (direct RMR cut on most models)
- MR920 / MR920L
- XR920
- DR920 / DR920P / DR920L
- Foundation Series equivalents
Other popular platforms
- PSA Dagger Full Size / Compact (often direct mount)
- IWI Masada / Masada Tactical (factory plate)
- Ruger RXM (RMR pin set / direct RMR mount)
- FN 509 MRD / 509 Tactical (factory RMR plate)
- Taurus G3 / G3C T.O.R.O. and similar TORO models with an RMR plate
- Many aftermarket RMR-cut slides, including popular Glock-pattern clones and competition guns
Also works with
- Optional high/low Picatinny mounts for rifles and PCCs
- Most third-party RMR adapter plates (C&H Precision, Forward Controls, Calculated Kinetics, OEM brand plates, etc.)
Not a direct fit (use Osight SE / K / S RMSc models instead)
Slim subcompacts such as Glock 43X/48 MOS, Sig P365 series, Springfield Hellcat OSP, S&W Shield Plus OR, Canik MC9 / TP9 Elite SC, and similar RMSc/K-cut pistols.
If your pistol is not listed, it will still work if the slide is RMR-cut or you have the correct RMR adapter plate. Contact TorchSA if you need help matching plate and screws.
What’s Included:
- 1 × Osight C Red Dot Sight
- 1 × CR1632 Battery
- Mounting screws
- Adjustment tools
- User manual
The Osight C delivers a large window, switchable 3 MOA / 32 MOA reticle, easy side-load battery changes and broad RMR compatibility in a light, compact package. Ideal for duty, concealed carry, home defense and range use. Available at torchsa.com.
Delivery

Payment & Security
Olight Osight C 3 MOA Red or Green Dot Sight with RMR Footprint
R4,499.00 tax incl
Availability: In stock
Free shipping
Reviews
Reviews
There are no reviews yet
Olight Osight C 3 MOA Red or Green Dot Sight with RMR Footprint
R4,499.00 tax incl
Availability: In stock
Description
The Olight Osight C is a compact open-emitter red dot sight built on the industry-standard Ruggedized Miniature Reflex (RMR / 407C / 507C) footprint. It is designed for full-size and compact pistols used for tactical, self-defense, concealed carry and sport shooting.
The reticle is switchable between:
- 3 MOA Dot
- 3 MOA Dot + 32 MOA Circle
- 32 MOA Circle only
This gives you a fine aiming point for precision or a larger circle for fast target acquisition.
A side-loading CR1632 battery lets you replace the cell without removing the optic from the slide, so your zero stays intact. Runtime is up to 75,000 hours on the lowest setting. A motion sensor turns the optic off after 3 minutes of inactivity and wakes it when movement is detected. When battery voltage drops below 2.2V, the reticle triple-flashes once per minute as a low-power warning. Memory function remembers your last brightness setting.
The 24 × 19 mm window uses a multi-coated anti-reflective lens for a bright, clear sight picture. The housing is machined from 7075 aluminum with a hard-anodized finish and is rated IPX7 waterproof. Side buttons control power and brightness and are usable with gloves.
Key Specifications:
- Reticle: 3 MOA Dot & 32 MOA Circle
- Brightness: 10 settings (including 2 Night Vision)
- Window Size: 24 × 19 mm
- Battery: CR1632 (side-loading)
- Battery Life: up to 75,000 hours (low)
- Footprint: RMR / 407C / 507C
- Material: 7075 Aluminum
- Waterproof: IPX7
- Dimensions: approx. 40 × 25 × 25 mm
- Weight: approx. 27 g (with battery)
- Warranty: 5 years
Compatible Firearms (RMR / 407C / 507C footprint)
The Osight C mounts to pistols cut for the RMR footprint, or to optics-ready slides using an RMR adapter plate. Always confirm plate, screw length and torque (typically 15–17 in-lbs with medium/blue threadlocker).
Glock (MOS plate required on factory MOS slides)
- G17, G19, G19X, G22, G23, G26, G34, G45, G47 Gen5 MOS
- G20, G21 Gen5 MOS
- G40 / G41 MOS and other MOS models with an RMR (MOS 02) plate
- Aftermarket RMR-cut Glock slides (direct mount)
Sig Sauer
- P320 Legion, P320 XFIVE Legion, P320 RX / Pro / AXG
- Other P320 slides specifically marked as RMR-compatible (some P320 cuts are DPP and need an adapter)
Canik (usually factory RMR plate)
- TP9 SFx
- SFx Rival / Rival-S
- TP9 Elite Combat / TTI Combat
- Other full-size/compact Canik models supplied with an RMR plate
CZ
- P-10 C / F / S Optics Ready (RMR plate typically required)
- Shadow 2 Optics Ready (RMR plate typically required)
Smith & Wesson
- M&P 2.0 / M&P M2.0 Optics Ready / CORE (RMR plate as required)
Springfield Armory
- Echelon
- XD Mod.3
- 1911 DS Prodigy
Walther (factory RMR plate)
- PDP 2.0 Full Size, Compact, F-Series, Pro, Match and Steel Frame
Heckler & Koch (factory RMR plate)
- VP9 Optics Ready, VP9L OR, VP9 Match and VP9A1 variants
Beretta
- 90 Series RDO / 92X RDO / M9A4 RDO
- APX A1 Full Size / Tactical RDO (plate as required)
Shadow Systems (direct RMR cut on most models)
- MR920 / MR920L
- XR920
- DR920 / DR920P / DR920L
- Foundation Series equivalents
Other popular platforms
- PSA Dagger Full Size / Compact (often direct mount)
- IWI Masada / Masada Tactical (factory plate)
- Ruger RXM (RMR pin set / direct RMR mount)
- FN 509 MRD / 509 Tactical (factory RMR plate)
- Taurus G3 / G3C T.O.R.O. and similar TORO models with an RMR plate
- Many aftermarket RMR-cut slides, including popular Glock-pattern clones and competition guns
Also works with
- Optional high/low Picatinny mounts for rifles and PCCs
- Most third-party RMR adapter plates (C&H Precision, Forward Controls, Calculated Kinetics, OEM brand plates, etc.)
Not a direct fit (use Osight SE / K / S RMSc models instead)
Slim subcompacts such as Glock 43X/48 MOS, Sig P365 series, Springfield Hellcat OSP, S&W Shield Plus OR, Canik MC9 / TP9 Elite SC, and similar RMSc/K-cut pistols.
If your pistol is not listed, it will still work if the slide is RMR-cut or you have the correct RMR adapter plate. Contact TorchSA if you need help matching plate and screws.
What’s Included:
- 1 × Osight C Red Dot Sight
- 1 × CR1632 Battery
- Mounting screws
- Adjustment tools
- User manual
The Osight C delivers a large window, switchable 3 MOA / 32 MOA reticle, easy side-load battery changes and broad RMR compatibility in a light, compact package. Ideal for duty, concealed carry, home defense and range use. Available at torchsa.com.
Delivery

Delivery

Payment & Security
Free shipping
Reviews
-
Website was easy to navigate. Order and delivery were processed quickly and easily.
-
Reviews
There are no reviews yet
Related Products

OPEN BOX Olight Baldr S Black 800lm 130m Weapon Light
Original price was: R3,499.00.R2,499.00Current price is: R2,499.00. tax incl
















































Website was easy to navigate. Order and delivery were processed quickly and easily.
Received extremely good service and good quality products
Fantastic torch for the small size.